張時中兼任教授的著作列表 - Publication List of Shi-Chung Chang

Publication List of 張時中 Shi-Chung Chang

Journal articles & book chapters:

  1. hun-Cheng Zhan, Shi-Chung Chang, Peter B. Luh, and Hao-Huai Lieu,, “Truthful Auction Mechanism Design for Short-interval Secondary Spectrum Access Market,” EEE Trans. on Wireless Communications, 2013
  2. Peter B. Luh, Christian T. Wilkie, Shi-Chung Chang, Kerry L. Marsh, Neal Olderman, “Modeling and Optimization of Building Emergency Evacuation Considering Blocking Effects on Crowd Movement,” IEEE Trans. on Automation Science and Engineering, vol. 9 , no. 4, pp. 687-700, Oct. 2010
  3. Feng Zhao, Peter B. Luh, Joseph H. Yan, Gary A. Stern, Shi-Chung Chang,, “Bid Cost Minimization Versus Payment Cost Minimization: A Game Theoretic Study of Electricity Auctions,” IEEE Trans. on Power Systems,, vol. 25, no. 1, pp. 181-194., Feb. 2010
  4. Feng Zhao; Luh, P.B.; Yan, J.H.; Stern, G.A.,S.-C. Chang, “Payment Cost Minimization Auction for Deregulated Electricity Markets With Transmission Capacity Constraints,” IEEE Transactions on Power Systems,, Volume 23, Issue 2, Page(s):532 – 544., May 2008
  5. Luh Peter B. , Bo Xiong,S.-C. Chang, “Group Elevator Scheduling With Advance Information for Normal and Emergency Modes,” IEEE Transactions on Automation Science and Engineering, vol. 5, no. 2, pp. 245-258., Apr. 2008
  6. B.-W.Hsieh,C.H.Chen,S.-C. Chang, “Efficient Simulation-Based Combination of Scheduling Policies by Integrating Ordinal Optimization with Design of Experiment,” IEEE Transactions on Automation Sciences and Engineering, vol. 4, no. 4, pp. 553-568, Oct. 2007
  7. S.-I. Chu,S.-C. Chang, “Time-of-day Internet Access Management by Combining Empirical Data-based Pricing with Quota-based Priority Control,” IET Communications, vol. 1, issue 4, pp. 587-596, Aug. 2007
  8. S.-C. Chang, M.-M. Hsieh, C.-W. Chen, “Reverse Auction-Based Job Assignment among Foundry Fabs,” MASM Special Issue of International Journal of Production Research, pp. 653-657, Jan. 2007
  9. P. B. Luh, W. E. Blankson, Y. Chen, J. H. Yan, G. A. Stern, F. Zhao,S.-C. Chang, “Payment Minimization Auction for Deregulated Electricity Markets using Surrogate Optimization,” IEEE Transactions on Power Systems, vol. 21, issue 2, pp.568-578, May 2006
  10. S.-C. Chang, M.-C. Hsu, L.Y.-H Ge, W.-C. Lin, “A Supervisory Control Approach for Automatic Protocol Conversion between Manufacturing Cell and Machine Controllers,” Bulletin of the College of Engineering, National Taiwan University, Jan. 2006
  11. K.-H. Chen, T.- D. Chiueh, S.-C. Chang, P. B. Luh, “Design and Implementation of a Parallel Processor IC for Job Shop Scheduling,” IEEE Transaction on Industrial Electronics, Volume 52, Issue 1, pp. 291 - 299, Feb. 2005
  12. Y.-H. Su, R.-S. Guo,S.-C. Chang, “Virtual Fab: Enabling Framework and Dynamic Manufacturing Service Provisioning Mechanism,” Information & Management, vol. 42, no. 2, pp. 329-348, Jan. 2005
  13. T.C. Lin, Y. S. Sun, S.-C. Chang,S.-I Chu, Y.-T. Chou, M.-W. Li, “Management of Abusive and Unfair Internet Access by Quota-based Priority Control,” Computer Networks, Vol. 44, Issue 4, pp. 441-462, Mar. 2004

Conference & proceeding papers:

  1. Rong-Huei Chen, Shi-Chung Chang,, “Generalized Bass Diffusion Model (GBDM) for Co-creation Networks - a Teaching Material Sharing Network Application*,” 013 IEEE Conference on System, Man and Cybernetics (SMC), Manchester,, Oct. 2013
  2. Yu-Ting Kao, Shun-Cheng Zhan, Shi-Chung Chang,, “Bottleneck-Centric Pull and Push Allocation and Sequencing of Wet-bench and Furnace Tools,,” Proceedings of 2013 e-Manufacturing & Design Collaboration Symposium (eMDC), Taiwan,, Sept. 2013
  3. Ting-Yu Ho , Shi-Chung Chang, “Stackelberg game formulation of prize competition design for seeking shortest path solutions,,” Proceedings of 2013 IEEE Conference on Automation Science and Engineering (CASE), USA,, Aug. 2013
  4. Yu-Ting Kao, Shi-Chung Chang, “low Time Estimation with Consideration of Production Target-induced Operation Variability for Semiconductor Fabrication,” Proceedings of 2013 IEEE Conference on Automation Science and Engineering (CASE), USA,, Aug. 2013
  5. Shun-Cheng Zhan, Shi-Chung Chang, Peter B. Luh, Hao-Huai Lieu,, “Truthful Auction Mechanism Design for Short-interval Secondary Spectrum Access Market,,” Proceedings of 2012 International Conference on ITS Telecommunications, Taiwan,, Nov. 2012
  6. Yu-Ting Kao, Shun-Cheng Zhan, Shi-Chung Chang, Simon Wang, Fenix Wang, Joey Chang, “Effective Bottleneck Centric Allocation and Sequencing of Wet-bench and Furnace Tool Groups,,” Proceedings of 2012 International Symposium on Semiconductor Manufacturing (ISSM), Tokyo,, Oct. 2012
  7. Yu-Ting Kao, Shun-Cheng Zhan, Shi-Chung Chang, “Efficient and Waiting Time Violation-free Furnace Tool Allocation via Integration of Sequencing Constraints,” Proceedings of 2012 e-Manufacturing & Design Collaboration Symposium (eMDC), Taiwan,, Sept. 2012
  8. Rong-Huei Chen, Shi-Chung Chang, Yi-Ren Chiou, Chia-Chiang Lai, Li-Wei Yeh, “Empirical Data-Based Modeling of Teaching Material Sharing Network Dynamics,,” Proceedings of 2011 IEEE Conference on System, Man and Cybernetics (SMC),, USA,, Oct. 2011
  9. 28. Shi-Chung Chang, Bo-Jiun Liao ,Yu-Ting Kao , Argon Chen, “Priority Cycle Time Behavior Modeling for Semiconductor Fabs,” 2009 simul, pp.38-43, Porto, Portugal, Sept. 2009
  10. 27. Fang-Hsiang Su, Shi-Chung Chang, Chih-Min Fan, Ya-Jung Tsai, Jethro Jheng, Ching-Pin Kao,Chun-Yao Lu, “A Novel Ontology-based Knowledge Engineering Approach for Yield Symptom Identification in Semiconductor Manufacturing,” 5th Annual IEEE Conference on Automation Science and Engineering Bangalore, India, Aug. 2009
  11. Peng Wang; Luh, P.B.,S.-C. Chang, Jin Sun, “Modeling and optimization of crowd guidance for building emergency evacuation”,” IEEE International Conference on Automation Science and Engineering, 2008. CASE 2008, Page(s):328 – 334, Washington D.C. , USA, Aug. 2008
  12. Jun-Rong Lee, S.-C. Chang, Fang-Hsiang Su; Chih-Min Fan, “Service oriented platform design for collaborative engineering data analysis,” International Symposium on Semiconductor Manufacturing, 2007. ISSM 2007, Page(s):1 - 4, Oct. 2007
  13. B. Xiong, P. B. Luh, S.-C. Chang, L. Michel, A. See, “Coherent Modeling and Effective Coordination for Building Emergency Evacuation,” Proceedings of IEEE International Conference on Automation Science and Engineering, 2007 (CASE 2007), Page(s):670 – 677, Sept. 2007
  14. J.-R. Lee, F.-H. Su, S.-C. Chang,C.-M. Fan, “Service Oriented Platform Design for Collaborative Engineering Data Analysis,” Proceedings of 2006 International Symposium on Semiconductor Manufacturing, pp. 245-248, Tokyo, Japan, Sept. 2007
  15. F. Zhao, P. B. Luh, Y. Zhao, J.H. Yan, G.A. Stern,S.-C. Chang, “Bid Cost Minimization vs. Payment Cost Minimization: A Game Theoretic Study of Electricity Markets,” IEEE Transactions on Power Engineering Society General Meeting, pp.1-8, Jun. 2007
  16. A.See, L. Michel, Bo Xiong, P.B. Luh, S.-C. Chang, “Transportation and HVAC System for Building Emergency Evacuation,” IEEE International Conference on Automation Science and Engineering, pp. 363-368, Oct. 2006
  17. S.-C. Chang, S.-I Chu, “Time-oF-Day Internet Access Management: Virtual Pricing vs. Quota Scheduling,” 10th IEEE Singapore International conference on communication systems, 2006. ICCS 2006, pp. 1-6, Singapore, Oct. 2006
  18. S.-C. Chang, K. J. Chen, “Priority X-Factor Modeling for Differentiated Manufacturing Service Planning,” Proceedings of 2006 International Symposium on Semiconductor Manufacturing, Tokyo, Japan, Sept. 2006
  19. S.-C. Chang, B.-J. Liao, A. Chen, “Priority Behavior Modeling of Fab for Supply Chain Management,” Proceedings of 2006 International Symposium on Semiconductor Manufacturing, Tokyo, Japan, Sept. 2006
  20. T-Y Hsieh, H.-Y. Huang, Y.-C. Chou, S.-C. Chang, “Managing Supply Chain by Using Channel Inventory Information,” Proceedings of International Conference on Modeling and Analysis of Semiconductor Manufacturing (MASM), Sigapore, Oct. 2005
  21. S.-C. Chang, M.-M. Hsieh, “Reverse Auction-Based Job Assignment among Foundry Fabs,” Proceedings of International Conference on Modeling and Analysis of Semiconductor Manufacturing (MASM), Sigapore, Oct. 2005
  22. P.B. Luh, L. Michel, S.-C. Chang, Santos E. Jr., Yu D., A. See, Bo X., G. Johnson, “Coherent Configuration and Operation of Building Transportation Systems,” Proceedings of IEEE International Conference on Automation Science and Engineering, PP.178 - 184, Edmonton,Canada, Aug. 2005
  23. P. B. Luh, D. Yu ,S.-C. Chang, “Achieving Six Sigma Deliveries in Supply Chains,” Proceedings of the 16th IFAC World Congress, Prague, Jul. 2005
  24. P. B. Luh, B. Xiong, S.-C. Chang, “Group Elevator Scheduling with Advance Information for Normal and Emergency Modes,” IEEE International Conference on Robotics and Automation, 2005. ICRA 2005, pp. 1419-1424, Apr. 2005
  25. T.-K. Hwang, S.-C. Chang, “Properties OF Iterative Proportional Capacity Allocation for Re-entrant Line Operations,” APIEMS 2004, Gold Coast Australia, Dec. 2004
  26. P. B. Luh, W. E. Blankson, Y. Chen, J. H. Yan, G. A. Stern, S.-C. Chang, F. Zhao, “Optimal Auction for the Deregulated Electricity Market Using Augmented Lagrangian and Surrogate Optimization,” Proceedings of IEEE Power Systems Conference & Exposition (PSCE 2004), New York City, USA, Oct. 2004
  27. Y.-H. Su, R.-S. Guo, S.-C. Chang, “Manufacturing and Engineering Collaboration Mechanism between Foundry and Fabless,” Proceedings of 2004 International Symposium on Semiconductor Manufacturing, Tokyo, Japan, Sept. 2004
  28. S.-C. Chang, Y.-T. Lin, Y.-J. Chang S.-K. Jeng, B.-W. Hsieh, “Learning Software Agent Design for Semiconductor Tool Group Dispatching,” Proceedings of 2004 Semiconductor Manufacturing Technology Workshop, Hsin-Chu, Sept. 2004